Variable speed control that cuts energy use, lowers mechanical stress and keeps critical plant motors running.
Automation That Drops Straight Into Your Line
Engineered cells and assemblies that integrate with existing machines — shorter installation, less disruption, higher output.
Lower Energy Cost. Cleaner Operations.
TopCon and Mono PERC modules with in-house EPC execution — design, supply, installation and long-term performance support.
Precision Panels for Peak Performance
MCC, PCC, pump and HT panels built to IEC standards with full routine testing and traceable documentation.
Every plant has different constraints — cycle time, hygiene, ambient temperature, uptime penalties. Our application engineers select and size the hardware, then validate it against your line conditions before it ships.
Robotic screwing, leak testing, EOL stations and traceability for tier-1 and tier-2 plants where cycle time and repeatability decide margin.
Explore industries
Drive and sensor packages for conveyors, sorters and shuttles, with networked I/O so WMS data stays synchronised with the floor.
Explore industries
Pump panels, flow and level instrumentation and SCADA dashboards that hold set-points while trimming pumping energy.
Explore industries
Vision-based inspection, audit-ready data logging and validated control philosophies for regulated production areas.
Explore industries
HT panels, RMUs and protection schemes that keep distribution stable in plants where an outage stops everything downstream.
Panel capabilities
Hydraulic servo retrofits and take-out robots that cut energy per shot and stabilise cycle-to-cycle consistency.
Explore industriesWritten by the engineers who commission the systems — measured results, not marketing claims.
Technical Note Where MVDs pay back fastest in cement, oil & gas and metals — soft starting, reduced mechanical stress and clean integration with plant automation.
Read the update
Case Study A multi-panel manufacturing facility gained load-level visibility, identified idle-running losses and built a measurable energy-reduction plan.
Read the case study
Case Study Defect detection, label verification and orientation checks at line speed — removing assembly failures and warranty risk without slowing output.
Read the case studySpecification, manufacturing, commissioning and lifecycle repair sit under one roof — so responsibility never gets passed between vendors.
MCC, PCC, pump, industrial and HT panels wired, tested and documented to IEC standards.
View capability
TopCon and Mono PERC modules manufactured in-house with tested performance data.
View capability
Feasibility, design, supply, installation and commissioning for rooftop and ground-mount plants.
View capability Component-level repair of drives, servo, SMPS and boards with root-cause reporting.
View capability Sheet metal, assembly, SMT and testing lines with traceability at every stage.
View capability
Scalable, compliance-ready supervisory software with energy and OEE dashboards.
View capability Sizing, selection and troubleshooting support from engineers who work on plant floors.
View capability
Catalogues, manuals and technical drawings available from the download centre.
Open download centre Engineering-Led SelectionSpecified for your duty cycle Connected & Data-ReadyIndustry 4.0 architectures Tested Before DispatchDocumented routine testing Energy & SustainabilityMeasured efficiency gains Since 1997, Lubi Electronics has grown from component supply into a full engineering house — manufacturing panels and solar modules near Ahmedabad, India, representing more than twenty global automation brands, and supporting installed equipment through its own service network.
Thousands of commissioned drives, servo axes, panels and vision systems across 20+ manufacturing sectors.
Certified processes, type-tested assemblies and test reports issued with every dispatch.
A dedicated support line plus regional engineers for selection, troubleshooting and on-site attendance.
Brand-agnostic selection means the recommended drive, controller or sensor is the one that fits the application — with genuine parts and authorised support behind it.
Share your application, drawings or load list. Our engineers will respond with a technical recommendation, panel concept or retrofit plan — no obligation.
Get in Touch With Our Engineers